Show Ipv6 Dhcp Relay - Cisco Nexus 7000 Series Command Reference Manual

show ipv6 dhcp relay

show ipv6 dhcp relay
To display the DHCPv6 relay global or interface-level configuration, including DHCPv6 server addresses
configured on interfaces, use the show ipv6 dhcp relay command.
show ipv6 dhcp relay [interface interface]
Syntax Description
interfaceinterface
Command Default
None
Command Modes
Any command mode
Command History
Release
6.2(2)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the globally configured DHCPv6 relay status and DHCPv6 server addresses:
switch# show ipv6 dhcp relay
DHCPv6 relay service : Enabled
Insertion of VPN options : Disabled
Insertion of CISCO options : Disabled
DHCPv6 Relay is configured on the following interfaces:
Interface
-------------
Ethernet1/4
Related Commands
Command
ipv6 dhcp relay
show ipv6 dhcp relay statistics
Cisco Nexus 7000 Series Security Command Reference
812
Modification
This command was introduced.
Relay Address VRF Name
------------- --------
red
(Optional) Displays the DHCPv6 relay address of the
interface. The supported interface types are ethernet,
port-channel, and VLAN.
Description
Enables the DHCPv6 relay agent.
Displays statistics relating to DHCPv6.
Show Commands