Show Ip Arp Inspection - Cisco Nexus 7000 Series Command Reference Manual

show ip arp inspection

show ip arp inspection
To display the Dynamic ARP Inspection (DAI) configuration status, use the show ip arp inspection command.
show ip arp inspection
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the status of the DAI configuration:
switch# show ip arp inspection
Source Mac Validation
Destination Mac Validation : Enabled
IP Address Validation
Vlan : 1
-----------
Configuration
Operation State
ARP Req Forwarded
ARP Res Forwarded
ARP Req Dropped
ARP Res Dropped
DHCP Drops
DHCP Permits
SMAC Fails-ARP Req = 0
SMAC Fails-ARP Res = 0
DMAC Fails-ARP Res = 0
IP Fails-ARP Req
IP Fails-ARP Res
Related Commands
Command
ip arp inspection vlan
show ip arp inspection interface
Cisco Nexus 7000 Series Security Command Reference
782
Modification
This command was introduced.
: Enabled
: Enabled
: Enabled
: Active
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
Description
Enables DAI for a specified list of VLANs.
Displays the trust state and the ARP packet rate for
a specified interface.
Show Commands