Show Radius - Cisco Nexus 7000 Series Command Reference Manual

show radius

show radius
To display the RADIUS Cisco Fabric Services (CFS) distribution status and other details, use the show radius
command.
show radius {distribution status| merge status| pending [cmds]| pending-diff| session status| status}
Syntax Description
distribution status
merge status
pending
cmds
pending-diff
session status
status
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the RADIUS CFS distribution status:
switch# show radius distribution status
distribution : enabled
session ongoing: no
session db: does not exist
merge protocol status: not yet initiated after enable
Cisco Nexus 7000 Series Security Command Reference
858
Displays the status of the RADIUS CFS distribution.
Displays the status of a RADIUS merge.
Displays the pending configuration that is not yet
applied to the running configuration.
(Optional) Displays the commands for the pending
configuration.
Displays the difference between the active
configuration and the pending configuration.
Displays the status of the RADIUS CFS session.
Displays the status of the RADIUS CFS.
Modification
This command was introduced.
Show Commands