Hardware Rate-Limiter - Cisco Nexus 7000 Series Command Reference Manual

hardware rate-limiter

hardware rate-limiter
To configure rate limits in packets per second on supervisor-bound traffic, use the hardware rate-limiter
command. To revert to the default, use the no form of this command.
hardware rate-limiter {access-list-log {packets| disable} [module module [port start end]]| copy {packets|
disable} [module modulemodule [port start end]]| f1 {rl-1 {packets| disable} [module module [port start
end]]| rl-2 {packets| disable} [module module [port start end]]| rl-3 {packets| disable} [module module[port
start end]]| rl-4 {packets| disable} [module module [port start end]]| rl-5 {packets| disable} [module module
[port start end]]}| layer-2 {l2pt {packets| disable} [module module [port start end]]| mcast-snooping
{packets| disable} [module module [port start end]]| port-security {packets| disable} [module module [port
start end]]| storm-control {packets| disable} [module module [port start end]]| vpc-low {packets| disable}
[module module [port start end]]}| layer-3 {control {packets| disable} [module module [port start end]]|
glean {packets| disable} [module module [port start end]]| glean-fast {packets| disable} [module module
[port start end]]| mtu {packets| disable} [module module [port start end]]| multicast {packets| disable}
[module module [port start end]]| ttl {packets| disable} [module module [port start end]]}| receive {packets|
disable} [module module [port start end]]| || [portgroup-multiplier multiplier module module]}
nohardware rate-limiter {access-list-log {packets| disable} [module module [port start end]]| copy {packets|
disable} [module modulemodule [port start end]]| f1 {rl-1 {packets| disable} [module module [port start
end]]| rl-2 {packets| disable} [module module [port start end]]| rl-3 {packets| disable} [module module[port
start end]]| rl-4 {packets| disable} [module module [port start end]]| rl-5 {packets| disable} [module module
[port start end]]}| layer-2 {l2pt {packets| disable} [module module [port start end]]| mcast-snooping
{packets| disable} [module module [port start end]]| port-security {packets| disable} [module module [port
start end]]| storm-control {packets| disable} [module module [port start end]]| vpc-low {packets| disable}
[module module [port start end]]}| layer-3 {control {packets| disable} [module module [port start end]]|
glean {packets| disable} [module module [port start end]]| glean-fast {packets| disable} [module module
[port start end]]| mtu {packets| disable} [module module [port start end]]| multicast {packets| disable}
[module module [port start end]]| ttl {packets| disable} [module module [port start end]]}| receive {packets|
disable} [module module [port start end]]| || [portgroup-multiplier multiplier module module]}
Syntax Description
access-list-log
packets
disable
module module
port start end
Cisco Nexus 7000 Series Security Command Reference
356
Specifies packets copied to the supervisor module for
access list logging. The default rate is 100 packets
per second.
Number of packets per second. The range is from 1
to 33554431.
Disables the rate limiter.
(Optional) Specifies a module number. The range is
from 1 to 18.
(Optional) Specifies a port start index. The range is
from 1 to 32. You specify the start port and and end
port with a space in between them.
H Commands