Cts Sxp Retry-Period - Cisco Nexus 7000 Series Command Reference Manual

C Commands

cts sxp retry-period

To configure a Security Group Tag (SGT) Exchange Protocol (SXP) retry period timer, use the cts sxp
retry-period command. To revert to the default, use the no form of this command.
cts sxp retry-period seconds
no cts sxp retry-period
Syntax Description
seconds
Command Default
120 seconds (2 minutes)
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
The SXP retry period determines how often the Cisco NX-OS software retries an SXP connection. When an
SXP connection is not successfully set up, the Cisco NX-OS software makes a new attempt to set up the
connection after the SXP retry period timer expires.
Note Setting the SXP retry period to 0 seconds disables the timer and retries are not attempted.
This command requires the Advanced Services license.
Examples This example shows how to configure the SXP retry period:
switch# configure terminal
switch(config)# cts sxp retry-period 120
This example shows how to revert to the default SXP retry period value:
switch# configure terminal
switch(config)# no cts sxp retry-period
Number of seconds. The range is from 0 to 64000.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
cts sxp retry-period
187