Telnet Server Enable - Cisco Nexus 7000 Series Command Reference Manual

T Commands

telnet server enable

To enable the Telnet server for a virtual device context (VDC), use the telnet server enable command. To
disable the Telnet server, use the no form of this command.
telnet server enable
no telnet server enable
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
Release
4.1(2)
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable the Telnet server:
switch# configure terminal
switch(config)# telnet server enable
This example shows how to disable the Telnet server:
switch# configure terminal
switch(config)# no telnet server enable
XML interface to system may become unavailable since ssh is disabled
Related Commands
Command
show telnet server
Modification
This command was deprecated and replaced with the feature telnet
command.
This command was introduced.
Description
Displays the SSH server key information.
Cisco Nexus 7000 Series Security Command Reference
telnet server enable
955