Show Copp Status - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show copp status

To display the control plane policing (CoPP) configuration status, use the show copp status command.
show copp status
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(2)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples
This example shows how to display the CoPP configuration status information:
switch# show copp status
Last Config Operation: service-policy input copp-system-policy
Last Config Operation Timestamp: 21:57:58 UTC Jun
Last Config Operation Status: Success
Policy-map attached to the control-plane: new-copp-policy
Modification
This command was introduced.
4 2008
Cisco Nexus 7000 Series Security Command Reference
show copp status
721