Cts Refresh Role-Based-Policy - Cisco Nexus 7000 Series Command Reference Manual

C Commands

cts refresh role-based-policy

To refresh the Cisco TrustSec security group access control list (SGACL) policies downloaded from the Cisco
Secure ACS, use the cts refresh role-based-policy command.
cts refresh role-based-policy
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to enter Cisco TrustSec manual configuration mode for an interface:
switch# cts refresh role-based-policy
Related Commands
Command
feature cts
show cts role-based policy
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Displays Cisco TrustSec SGACL policy
configuration.
Cisco Nexus 7000 Series Security Command Reference
cts refresh role-based-policy
157