Aaa Authentication Rejected - Cisco Nexus 7000 Series Command Reference Manual

A Commands

aaa authentication rejected

To configure the login block per user, use the aaa authentication rejected command. To remove the login
block per user, use the no form of this command.
aaa authentication rejected attempts in seconds ban block-seconds
no aaa authentication rejected
Syntax Description
attempts
seconds
block-seconds
Command Default
None
Command Modes
Global configuration
Command History
Release
7.3(0)D1(1)
Usage Guidelines
This feature is applicable only for local users.
Examples
The following example shows how to configure the login parameters to block a user for 300 seconds when 5
login attempts fail within a period of 60 seconds.
switch# configure terminal
swtich(config)# aaa authentication rejected 5 in 60 ban 300
Related Commands
Command
clear aaa local user blocked
show aaa authentication
show aaa local user blocked
Number of login attempts fail before a user is blocked.
Time period within which the login attempt fails.
Time period in which the user is blocked after a failed
login attempt.
Modification
This command was introduced.
Description
Clears the blocked local user.
Displays the AAA authentication configuration.
Displays the blocked local users.
Cisco Nexus 7000 Series Security Command Reference
aaa authentication rejected
35