Configuring Auto Policy-Based Routing
This chapter describes how to configure the Auto Policy-Based Routing (PBR) feature on the Citrix NetScaler
Application Delivery Controller (ADC) appliance to ensure that return traffic from the real server (RS)
reaches the RISE appliance.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information" chapter or the
Feature History table below.
Information About Auto Policy-Based Routing
This section includes the following topics:
Finding Feature Information, page 49
Information About Auto Policy-Based Routing, page 49
Licensing for Cisco RISE , page 52
Guidelines and Limitations for Auto Policy-Based Routing, page 52
Default Settings for Auto Policy-Based Routing , page 53
Configuring Auto Policy-Based Routing, page 53
Verifying the Auto Policy-Based Routing Configuration, page 60
Feature History for Auto Policy-Based Routing, page 63
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
5
C H A P T E R
https://tools.cisco.com/bugsearch/
Configuration Guide
and the release notes
49