Hitachi Compute Blade 2000 User Manual page 1499

Message content
Explanation When you activated an LPAR, the memory capacity you specified
could not be secured.
LPAR manager Aborts LPAR activation.
operation
What to do Reduce the memory allocation or try again to activate the LPAR after
you have deactivated a currently active LPAR.
Message content
Explanation When you activated an LPAR, the memory capacity you specified
could not be secured.
LPAR manager Aborts LPAR activation.
operation
What to do The memory could not be secured due to fragmentation. Reduce the
memory allocation or try again to activate the LPAR after you have
deactivated a currently active LPAR.
Message content
Explanation Because the memory size is zero, the LPAR cannot be activated.
LPAR manager Aborts LPAR activation.
operation
What to do Set a memory size and active the LPAR.
Message content
Explanation No group can be deleted.
LPAR manager Aborts the specified process.
operation
What to do Review the specified process.
Message content Not Changed!! Select Device is Management Path.
Explanation When you tried to change the NIC schedule mode, it was not changed
because the selected NIC was set as the management path.
LPAR manager Aborts the specified process.
operation
What to do Reconsider the specified processing.
Message content
Explanation Any NTP server is not set.
LPAR manager Aborts the time acquisition from an NTP server.
operation
What to do Set an IP address to NTP Server 1 or NTP Server 2.
Memory allocation failed (Insufficient).
Memory allocation failed (Fragmentation).
Memory size is zero.
No groups can be removed.
NTP server is not set.
1448