Hitachi Compute Blade 2000 User Manual page 1748

(5) Setting the information on the SNMP agent side
Select the SNM command of the console for the I/O slot expansion unit > A. Edit
agent setting and M. Edit manager setting to perform Agent setting and
Manager setting, and then set the various items of information on the SNMP
agent, the destination of SNMP traps, SNMP manager address, and community
name.
(6) Performing SNMP tests
Select the SNM command of the console for the I/O slot expansion unit > T.
SNMP trap test, and then perform SNMP trap transmission to perform the
SNMP trap notification test.
(7) SNMP operation
Operate the SNMP function by following the information that is set with the
console. When a fault occurs in the I/O slot expansion unit, obtain log files
needed for fault analysis using the DL command if there is a request from
maintenance personnel.
1697