Hitachi Compute Blade 2000 User Manual page 1848

–SWITCH:VALUE
–SWITCH
[TRANSPORT]
HOST
-r(emote)
[PORT]
[PREFIX]
-u(sername) USERNAME
-p(assword) PASSWORD
-a(uthentification) VALUE
-encoding VALUE
-file VALUE
-
-skipCAcheck
-
-skipCNcheck
Note*: See Chapter 5: Server Blade Setup > Server Settings Tab > Service Settings for
details about the port number (wsmasn).
VALUE
Sets HTTPS to the URI scheme.
Specifies a format: DNS name, NetBIOS
name, or IP address.
Uses a port number set for wsmans.(*)
By default, wsman is set.
Specifies the user name of a server blade
connected.
Specifies the user password of a server
bladed connected.
Authentication mechanism used for server
connection
- None
- Basic
- Digest
- Negotiate
Specifies an encoding for communication with
a server blade connected.
Specifies an XML file read from a file when
s(et), c(reate), and i(nvoke) operations are
executed.
Specifies that the server certification does not
need a signature of a trusted route
certification authority. You need to use this
option only with a trusted computer.
Specifies that a common name for a server
certification does not need to be the same
name as the server host name. You need to
use this option only with a trusted computer.
1797
Description