Hitachi Compute Blade 2000 User Manual page 1844

You can view verbs and properties for a target to operate using "show".
verb available for options
verb
cd -default, -examine, -help, -output,
-version
show -all, -default, -display, -examine,
-help, -level, -output, -version
exit -help, -output, -version
help -examine, -help, -output, -version
version -examine, -help, -output, -version
set -examine, -help, -output, -version
start -examine, -force, -help, -output,
-version
stop -examine, -force, -help, -output,
-state, -version, -wait
reset -examine, -help, -output, -version
targets for operations
target
/admin1/system1
/admin1/system1/cpu<N>
/admin1/system1/capabilities1/cpucap<N>
/admin1/hdwr1/mainchassis1/card<N>/chip<N>
/admin1/system1/memory1
/admin1/hdwr1/mainchassis1/card<N>/pmem<N>
/admin1/system1/pwrsupply<N>
/admin1/system1/fan<N>
/admin1/system1/sensors1/sensor<N>
/admin1/system1/sensors1/currentsensor<N>
/admin1/system1/sensors1/tachsensor<N>
/admin1/system1/sensors1/tempsensor<N>
/admin1/system1/sensors1/voltsensor<N>
/admin1/hdwr1/mainchassis1
/admin1/system1/settings1/bootcfgsetting1
/admin1/system1/sp1/account<N>
/admin1/system1/sp1
Note*: This includes an item showing information at the last EFI boot.
Options
1793
Description
Moves among layers.
Shows properties and verbs for a
target.
Finishes SMASH-CLP.
Shows help for a target.
Shows a version for a target.
Sets properties for a target.
Requests the target to start.
Requests the target to stop.
Requests the target to reset.
Operation corresponding to the
target
Shows server blade status.
Powers on the server blade.
Powers off the server blade.
Performs server blade hardware
reset.
Shows processor status.(*)
Shows memory status.
Shows power supply module
status.
Shows fan module status.
Shows sensor information.
Shows FRU information.
Switches boot devices.
Shows account information.
Restarts BMC.