Hitachi Compute Blade 2000 User Manual page 1334

 LP system logs
The following functions are available in the LP System Logs screen.
Changes the level of the LP system log to be displayed.

Displays the details of the collected LP system log.

There are three levels of LP system logs as shown in the table below. The levels are
Information, Warning, and Error, in rising order of threat level.
LPAR manager stores the latest 256 LP system logs. If the number of LP system logs
exceeds 256, logs are overwritten in sequence, starting at the oldest log.
To display the detailed information, place the cursor on the LP system log and press
Enter.
Levels of LP system logs
# Level
1 Error An LPAR manager system error
occurred
2 Warning This is not an error, but you should
pay attention to it.
3 Information This event does not apply to the
above levels.
+---------------------------------------------------(8) Error Event Detected --+
|+- LP System Logs -----------------------------------------(1) All level
|| Level Date Time
|| Info. 2009/02/18 14:12:47 LP auto activation process is ended.
|| Info. 2009/02/18 14:12:42 LP activates LPAR in auto activation process.
|| Info. 2009/02/18 14:12:36 LP activates LPAR in auto activation process.
|| (3) (4) (5)
||
||
||
||
||
||
||
||
||
||
||
||
||
||
|+----------------------------------------------------------------------------+|
+------------------------------------------------------------------------------+
|
+------------------------------------------------------------------------------+
Description
See the action in
system logs screen
Event
(6)
(7) [PageUp]:Page Up / [PageDown]:Page Down Esc:Menu |
1283
Action
LPAR manager
messages.
--+|
(2) 2/2 ||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||