Hitachi Compute Blade 2000 User Manual page 1140

When the new configuration has been saved successfully, a message "LP configuration is
saved successfully" is displayed.
+------------------------------------------------------------------------------+
|+-- Menu [LP_192168020] ----------------------------- 2009/02/18 11:23:45 -+ |
||
|| Logical Partition Configuration
|| Logical Processor Configuration
|| Physical Processor Configuration
|| PCI Device Information
|| PCI Device Assignment
|| VNIC Assignment
|| Shared FC Assignment
|| Allocated FC Information
|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
|+-- Tips -------------------------------------------------------------------+ |
|| F3 : Activate F8 : LPAR Screen
|| F4 : Deactivate F9 : Save Configuration
|| F5 : Reactivate
|| F6 : Add Definition Alt + t : Screen Refresh
|| F7 : Remove Alt + r : LP System Shutdown
|+---------------------------------------------------------------------------+ |
| System Configuration
+------------------------------------------------------------------------------+
| :Move Cursor Enter:Select
+------------------------------------------------------------------------------+
* Saving the contents set on the LPAR manager screen, the LPAR manager will boot with
the saved configuration reflected at the next boot.
Time required for F9: Save Configuration increases
depending on the number of defined LPARs. It usually
finishes in a minute. When a heavy load is on the LPAR
manager, it might take several minutes for saving.
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
Front Panel
LP System Logs
Firmware Version Information
LP Ver. : VV-RR(TT-KK)
1089
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
| |
| |
|
|