Hitachi Compute Blade 2000 User Manual page 1745

2. Specifications of SNMP Trap Function
Item
Means of notification
Maximum number of SNMP managers that can be
notified simultaneously
Event of notification
Content of Binding of the first variable
messaging (Standard)
Binding of the second variable
(Standard)
Binding of the third variable
Binding of the fourth variable
Binding of the fifth variable
Binding of the sixth variable
Note: This SNMP trap function does not support the SNMP standard trap.
3. Specifications of SNMPv3
Item
Authentication: Hush method
Encryption method
(2) Prerequisites
Prerequisites for using the SNMP function are listed in the table below.
No.
1 The SNMP manager receiving SNMP traps must be compatible with SNMPv1/v2c/v3.
2 The environment must enable communications between the I/O slot expansion unit
and the management server where the SNMP manager operates.
SNMP
(SNMPv2Trap/SNMPv3Trap)
4
When the SEL of I/O slot expansion
unit faults is issued.
Time when the alert was sent.
Chassis ID
Alert level
Alert message
Location where the alert occurred
Alert ID
See Alert Log Message in Chapter
11.
MD5/SHA-1
DES/AES128
Prerequisites
1694
Description
Description