Hitachi Compute Blade 2000 User Manual page 1494

Message content
Explanation The LP IP Address needs to be changed (to something other than 0).
LPAR manager Waits for the LP IP Address to be changed.
operation
What to do Change the LP IP Address.
Message content
Explanation The virtual NIC System Number needs to be changed (to something
other than 0).
LPAR manager Waits for the virtual NIC System Number to be changed.
operation
What to do Change the virtual NIC System Number.
Message content
Explanation Due to beyond the upper limit of shared NIC, the scheduling mode
cannot be changed to shared.
LPAR manager Aborts the specified process.
operation
What to do Reconsider the specified process.
Message content
Explanation Indicates that connecting or disconnecting the device has failed.
LPAR manager If activating the LPAR, stops activation. If changing the device target,
operation stops connecting or disconnecting the device.
What to do Deactivate the relevant LPAR, reassign the device that has been
assigned to the LPAR, and then reactivate the LPAR.
Message content Device Schedule Mode is not Exclusive Shared.
Explanation The schedule mode of the target PCI device is not exclusively shared.
LPAR manager Aborts the specified process.
operation
What to do Select a PCI device with the exclusively shared mode (Schd:E).
Message content
Explanation An error in the characters you typed caused the setting process to fail.
LPAR manager Aborts character setting.
operation
What to do Revise the entry restrictions.
Message content
Explanation The process of saving the LPAR manager configuration information
failed.
LPAR manager Aborts the specified process.
operation
What to do Check the management path network configuration and then execute
it again.
Change LP IP Address
Change VNIC System No
Count Over Shared NIC Config.
Device Assign error
Error Character
Failed to save LPAR manager configuration
1443