Hitachi Compute Blade 2000 User Manual page 1270

The following table describes items on this screen.
# Title Official Name
(1) Select Select Display LPAR manager firmware version 59-1X/79-1X or later
Display
(2) Lpar# LPAR Number Displays the LPAR numbers to which a Fibre-channel (FC) has been
(3) Slot# Slot Number
(4) Port# Port Number
(5) SchMd Scheduling
Mode
(6) vfcID VfcWWNID
(7) WWPN World Wide
Port Name
(8) WWNN World Wide
Node Name
WWPN World Wide
(Migration) Port Name
(Migration)
(9) PageUp/ Page Up/
PageDown Page Down
keys
(10) Vfc Seed Vfc seed
Info. Information
(11) Pages Pages
(12) Error Event Error event
Detected detection
(1) How to change WWNs to display
LPAR manager firmware version 59-1X/79-1X or later
Place the cursor on Select Display on the upper right and press Enter to display a
subscreen. On the subscreen, select a WWN to display and press Enter.
Description
Selects one of World Wide Names to display:
WWN: World Wide Name for FC
WWN (Migration): World Wide Name for FC temporarily used in
migration
allocated, in ascending order.
"-" is displayed if the FC has not been allocated to any LPAR.
Displays the physical slot number to which the FC is inserted.
Displays the port number of the FC.
Displays the FC's scheduling mode.
D: Allocated to a LPAR in the dedicated mode.
S: Allocated to a LPAR in the shared mode.
Displays the configured vfcWWNID if the allocated FC is in the
shared mode.
Displays "-" for anything other than the shared FC.
Displays the FC's World Wide Port Name.
Displays "?" for anything other than the Hitachi FC adapter.
Displays the FC's World Wide Node Name.
Displays "?" for anything other than the Hitachi FC adapter.
LPAR manager firmware version: 59-1X/79-1X or later and LP
model: Enterprise
Displays World Wide Name for FC temporarily used in migration. For
details, see HVM Navigator User's Guide Migration Functions. This
item is displayed when WWN (Migration) is selected in item (1).
Page Up: scrolls a page of the screen upwards.
Page Down: scrolls a page of the screen downwards.
Displays the Vfc seed information used in creating WWN.
Numerator: Displays the current page.
Denominator: Displays the total number of pages.
Displays that LP system logs of the error level are detected.
When this is displayed, check the LP system log in the LP System
Logs screen.
See LP system logs for checking LP system logs.
To delete this screen, press Esc on the LPAR manager Menu screen
or open the LP System Logs screen.
1219