Hitachi Compute Blade 2000 User Manual page 1016

Order
1
2
3
4
5
6
7
When you type the bind password, the changed setting values are displayed. A
confirmation message appears. To apply the LDAP server connection setting, type Y
and press Enter. To cancel the setting, type N after the confirmation message and
press Enter, or just press Enter.
(D,C,S,A,R,[Q]) : C (Enter)
LDAP : Enable
(0=Disable,1=Enable,[Unchange]) : 1
LDAP server 0 : 192.168.1.100
([Unchange]) : 192.168.1.101
LDAP server 1 : 192.168.1.200
([Unchange]) : 192.168.1.201
LDAP server 2 :
([Unchange]) : (Enter)
Set port number to 636? (Y,[N]) : N
Port number : 636
(1-65535,[Unchange]) :
Set Bind DN to Anonymous? (Y,[N]) : N
Bind DN : bind
([Unchange]) : (Enter)
Set Password? ([Y],N) : Y
Password : *****
([Unchange]) :
Retype password :
-- connection setting --
LDAP : Enable
LDAP server 0 : 192.168.1.101
LDAP server 1 : 192.168.1.201
LDAP server 2 :
Port number : 636
Bind DN : bind
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
When a bind password is configured, 5 asterisks "*****" are displayed.
When a bind password is set to be Anonymous, no setting is
required for the bind password.
Enable or Disable the LDAP feature
Address for LDAP server 0
Address for LDAP server 1
Address for LDAP server 2
Port number
Bind DN
Bind password: up to 32 character string in ASCII
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
965
Description