LPAR manager introduction
Overview of introducing LPAR manager
The following flow chart shows how to introduce LPAR manager.
Setting for system
Function
Performance
Number of LPAR (OS)
.
.
Network environment
design
- IP address plan
- LAN switch parameter
Storage environment
design
-SAN disk partitioning plan
- FC switch parameter
- SAN security parameter
LP parameter design (*1)
- System parameter
- Partition parameter
Device introduction
Network environment
configuration
Storage environment
configuration
LP parameter setting (*2)
OS introduction and setting
- Network
- Application required
- Management software
- Other necessary settings
Start Operation.
(*1) Create the parameter sheet using the
system requirements. Refer to "LPAR manager
setting item" for details.
(*2) Set the LP/EFI driver on the LPAR manager
screen and guest screen according to the
parameter sheet.
1037