Hitachi Compute Blade 2000 User Manual page 1721

(b) moduleStatusMm group (3/7)
Object
No
identifier
16 mmVoltSensor
1Valid
17 mmVoltSensor
2Name
18 mmVoltSensor
2Value
19 mmVoltSensor
2Valid
20 mmVoltSensor
3Name
21 mmVoltSensor
3Value
22 mmVoltSensor
3Valid
(*1) "unknown" is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) "unknown" is shown when no management module is installed or the status cannot be
obtained. "power-off" is shown after executing SDN in the process of setting
redundancy.
(*3) "0" is shown as the number of sensor when no management module is installed.
(*4) "Not install" is shown if no management module is installed or redundancy setting is on
the process; "Cannot get data" is shown if the data cannot be obtained.
OID Syntax
.1.3.6.1.4.1.1 INTEGER
16.5.39.3.3.2
.1.4
.1.3.6.1.4.1.1 Display
16.5.39.3.3.2 String
.1.5
.1.3.6.1.4.1.1 Integer32
16.5.39.3.3.2
.1.6
.1.3.6.1.4.1.1 INTEGER
16.5.39.3.3.2
.1.7
.1.3.6.1.4.1.1 Display
16.5.39.3.3.2 String
.1.8
.1.3.6.1.4.1.1 Integer32
16.5.39.3.3.2
.1.9
.1.3.6.1.4.1.1 INTEGER
16.5.39.3.3.2
.1.10
1670
Access Description
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1 V.
The actual value is one-tenth of
the response value.
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the management
module installed in the slot
shown in #5. (*4)
RO Shows the voltage value of the
management module installed
in the slot shown in #5. (*5) The
value is shown using the unit of
0.1 V. The actual value is one-
tenth of the response value.
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown