Hitachi Compute Blade 2000 User Manual page 1617

b. Setting the information for using the SNMP polling
Select MIB objects to acquire the information on Compute Blade and
configure the necessary settings to acquire the values by following the
manual of your SNMP manager. Information obtained from Compute Blade
is shown in MIB reference.
(4) Example of environment configuration for SNMP
BladeSymphony equipment
Management Management
module #0 module #1
LAN terminal
(Upper: MGMT0 or Middle: MGMT1)
No. Item
1 SNMP manager
(5) Setting the information on the SNMP agent side
Select External cooperation -> SNMP setting -> Agent setting and Manager
setting, and then set the various items of information on the SNMP agent, the
destination of SNMP traps, SNMP manager address, and community name for
SNMPv1/v2c. To use SNMPv3, set items of information on the SNMP agent in
the same way, including the destination of SNMP traps, user name, access level,
types of authentication and encryption, and passwords of authentication and
encryption, especially the engine ID is a must.
(6) Performing SNMP tests
Select External cooperation -> SNMP setting from the system Web console of
the management module and execute SNMP trap transmit ion menu to perform
the SNMP test trap notification test.
LAN cable
Management
LAN/
Server
WAN
(SNMP manager)
Description
- It is necessary for a customer to obtain a
management server equipped with an SNMP manager
for receiving SNMP traps and processing SNMP
requests.
- The SNMP protocol essential for the SNMP manager
to use is SNMPv1/v2c/v3.
1566
SVP#1