Hitachi Compute Blade 2000 User Manual page 1226

Open the Logical Partition Configuration screen. Move the cursor over the PC
column of the LPAR whose Processor Capping you want to enable, and press
Enter. This will open a subscreen. Use the arrow keys ([↑] or [↓]) to select Yes, and
press Enter.
(21) How to enable the virtual COM console function
Display the Logical Partition Configuration screen.
Place the cursor on the VC column of the LPAR line whose virtual COM console
function you want to enable, and then press Enter to display the subscreen. Select
Yes by moving the cursor with the [] [] keys, and then press Enter. As a result,
you can connect the LPAR guest screen via telnet. The TCP port to be used at the
connection via telnet can be found in the comment that appears when pointing to
the VC column of LPAR line or in the subscreen that appears when pointing to the
VC column of LPAR line and pressing Enter.
When the virtual COM console function is enabled and connected to the LPAR
guest console via telnet, LPAR guest screen connection by using the F8 key in the
LPAR manager screen is still available. In this case, the LPAR guest screen
displayed on the LPAR manager screen is preceded.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Configuration ------------------------------------+|
|| # Name Sta Pro Shr Ded Srv
|| 1 LPAR1 Act 2 0
|| 2 LPAR2 Dea 1 0
|| 3 LPAR3 Dea 1 0
|| 4 LPAR4 Dea 1 0
|| 5
|| 6 +-------------------------+
|| 7 | LPAR1 Virtual Console |
|| 8 |
|| 9 |
|| 10 |
|| |
|+------------------------+-------------------------+-------------------------+|
|+- Logical Information --| Virtual Console Disable |hysical Information -----+|
|| Pro Shr+-------------------------+er Memory
|| Assign Total 5 0
|| Act Total 2 0
|| Remain
|+----------------------------------------------++----------------------------+|
| Virtual Console(TCP Port=20801)
+------------------------------------------------------------------------------+
| F2:Mem Alloc Dsp F3:Act F4:Deact F5:React F6:Add F7:Remove
+------------------------------------------------------------------------------+
Mem VN ID AA AC PC VC PB
2 100 2048 0 Y 1 N * N BIOS
1 100 1024 0 Y 2 N * N BIOS
1 100 1024 0 Y * N * N BIOS
1 100 1024 0 Y * N * N BIOS
(TCP Port=20801) |
|
Yes |
No |p / [PageDown]:Page Down ||
5 5120 0 || Processors
2 2048 0 || Shared
2560 || Dedicate
1175
||
||
||
||
||
||
||
||
||
||
||
: 4608 MB ||
: 8(8) ||
: 0 ||
: 2 ||
|
Esc:Menu |