Hitachi Compute Blade 2000 User Manual page 1495

Message content
Explanation The device is a shared FC, so you need to change it on the PCI Device
Assignment screen.
LPAR manager Aborts the specified process.
operation
What to do Make the setting on the Shared FC Assignment screen.
Message content
Explanation The device is a shared NIC, so you need to change it on the PCI
Device Assignment screen.
LPAR manager Aborts the specified process.
operation
What to do Make the setting on the VNIC Assignment screen.
Guest operating system might not remove USB devices safely.
Message content
Explanation Indicates that connecting or disconnecting the device might have
failed.
LPAR manager Only detaches the USB device, and stops changing the USB device
operation assignment to other LPARs.
What to do Assign the USB device to the LPAR again.
Message content LPAR manager could not import Time Setting of SVP.
Explanation Importing time from the management module failed.
LPAR manager Aborts the specified process.
operation
What to do Check if the management module version supports the NTP linkage.
Message content LPAR manager is busy with another LPAR(X) activation process.
Explanation During LPAR Activation processing, activation failed except for the
securing of resources.
LPAR manager Aborts the specified process.
operation
What to do Wait a moment and then retry the specified process.
Message content
Explanation Operation is not available due to LPAR migration in execution.
LPAR manager Aborts the specified process.
operation
What to do Wait a while until LPAR migration is complete and then retry the
specified process.
Go to Shared FC Assign on Type=F & Schd=S.
Go to VNIC Assign on Type=T & Schd=S.
Force to detach.
LPAR manager is executing LPAR Migration,
Please try again after it is finished.
1444