Hitachi Compute Blade 2000 User Manual page 1214

# Title Official Name
(12) PN Processor Node LPAR manager firmware version 59-2X/79-2X or
Description
later
<NUMA: disabled>
Displays the processor node assigned to the LPAR.
Processor node cannot be set.
・ Deactivate
A: Node will be automatically selected when the
LPAR is activated.
・ Activate
A: Node is automatically selected.
<NUMA: enabled>
Displays the processor node assigned to the LPAR.
Processor node cannot be set.
・ Deactivate
A: Node will be automatically selected when the
LPAR is activated.
・ Activate
0 to the maximum node number: Node numbers
displayed are assigned.
M: Multiple nodes are assigned.
The following table shows displayed processor
node.
NUMA
Deactivate Activate
setting
Disabled A A
Enabled A 0 to the max # or M
1163
Initial Value
(When LPAR
is added)