Hitachi Compute Blade 2000 User Manual page 1478

LPAR manager
LPAR
setting change
(Target
LPAR)

Transfer OS from a
LPAR manager
environment to
another LPAR
manager
environment *4

Transfer OS from
Basic environment
to LPAR manager
environment

Transfer OS from
LPAR manager
environment to
Basic environment
: affected, such as needing to deactivate LPAR.
- : not affected.
*1: Target LPARs need to be deactivated with standard server blades with LPAR
manager firmware 58-3X or later versions or high-performance server blades
with LPAR manager firmware 78-3X or later versions.
*2: Target LPARs need to be deactivated in the shared mode.
*3 Target LPARs need to be deactivated with standard server blades with LPAR
manager firmware 58-4X or later versions or high-performance server blades
with LPAR manager firmware 78-4X or later versions.
*4: For LPAR migration in concurrent maintenance mode, deactivating the target
LPAR is not needed.
Affected area
LPAR LPAR LPAR
(Other manager manager
LPAR) (Service) (System)
- - -
- - -
- - -
1427
Remarks
Make sure to change the
setting of the SAN boot
environment, even if only
the target LPAR is
affected.