Hitachi Compute Blade 2000 User Manual page 1021

If you type G in the SSH host key menu and press Enter, you can generate a host key
pair of the SSH server. To generate the host key pair, type Y and press Enter. To
cancel the host key pair, type N and press Enter, or just press Enter.
(G,H,B,R,[Q]) : G (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Generating host key was completed.
Hit enter key. (Enter)
If you type H in the SSH host key menu and press Enter, the host key information on
the SSH server is displayed.
(G,H,B,R,[Q]) : H (Enter)
-- Host key information --
Key length : 1024
Fingerprint : b6:16:6f:15:74:d6:89:95:86:76:b3:82:ba:89:be:b7
Hit enter key. (Enter)
Items of the host key information are described in the table below.
Item Description of item
Key length Host key length
Fingerprint Host key fingerprint
If you type B in the SSH host key menu and press Enter, you can save the host key
pair of the SSH server. You are prompted to enter characters used for a file name to
be generated when saving. Enter the characters for the file name, and a message
appears to confirm the setting. To save the host key pair, type Y and press Enter. To
cancel the save, type N and press Enter, or just press Enter.
(G,H,B,R,[Q]) : B (Enter)
Input backup file name ([Quit]) : key_000000
Confirm? (Y,[N]) : Y (Enter)
- Creating backup file was completed.
- Backup file name is pub-key_000000.backup.
Hit enter key. (Enter)
Value
Integer
XX:XX:XX:XX:XX:XX:XX
:XX:XX:XX:XX:XX:XX:X
X:XX:XX
(Enter)
970
Description of value
Unit: bit
"XX" stands for two
hexagonal figures.
Alphabets from 'a' to 'f' is
shown in lower case.