Hitachi Compute Blade 2000 User Manual page 1253

VNIC
Guest OS Device
type
2008
NIC2
Windows Server NIC1
2008 SP2
NIC2
Windows Server NIC1
2008 R2
NIC2
Windows Server NIC1
2008 R2 SP1
NIC2
Windows Server NIC1
2012
NIC2
Windows Server NIC1
2012 R2 NIC2
: Supported and available; -: Not supported
*1: "Yes" might be shown for Link detected when you perform the ethtool eth(x)
command after performing the ifconfig eth(x) down command. But this will not
affect the actual operation.
*2: Supported by LPAR manager firmware version 59-2X/79-2X or later.
*3 Supported by LPAR manager firmware version 59-3X/79-3X or later.
*4 Supported by LPAR manager firmware version 59-4X/79-4X or later.
*5 Supported by LPAR manager firmware version 59-51/79-51 or later.
*6 Supported by LPAR manager firmware version 59-52/79-52 or later.
*7 Supported by LPAR manager firmware version 59-5X/79-5X or later.
*8 Supported by LPAR manager firmware version 59-72/79-72 or later.
(2) How to Change VNIC assignment
Display the Virtual NIC Assignment screen.
Deactivate the LPAR to change the virtual NIC assignment. Place the cursor on the
crossing item of the LPAR in line and the virtual NIC number in the column, and
press Enter to display the subscreen for selecting the assignment. Place the
network segment of the virtual NIC you want to change, and then press Enter.
When LPAR manager operating mode is changed from

the expansion mode to standard mode, virtual NIC
numbers 8 to 15 assigned to each LPAR and VF NIC
definition are released.
When you have assigned a segment duplicately in

LPAR manager expansion mode, the duplicate segment
assignment remains even if LPAR manager is changed
to the standard mode. To disable the segment duplicate
assignment, cancel the setting and then set the shared
NIC again.
When you have defined a setting by the port, the setting

per port remains even if LPAR manager is changed to
the standard mode. To disable the setting per port,
cancel the setting and then set the shared NIC again.
Standard server blade
X55R3/
X55A1 X55A2 X55R4
X55S3
- - -
  
  
-
 
-
 
  
  
- - -
*3 *2
-
 
- - -
- - -
1202
High-performance
server blade
X57A1 X57A2
- - -
-
 
-
 
-
 
-
 
-
 
  
- - -
*3 *2
  
- - -
-
 