Hitachi Compute Blade 2000 User Manual page 1644

(a) moduleConfigBlade group (2/25)
Object
No.
identifier
13 bladeInfoCh .1.3.6.1.4.
assisSerialN 1.116.5.39
o .2.2.1.1.10
14 bladeInfoBel .1.3.6.1.4.
ongedPartitio 1.116.5.39
nNo .2.2.1.1.11
15 bladeInfoHv .1.3.6.1.4.
mType 1.116.5.39
.2.2.1.1.12
16 bladeInfoPro .1.3.6.1.4.
ductSerialNo 1.116.5.39
.2.2.1.1.13
17 bladeInfoUui .1.3.6.1.4.
d 1.116.5.39
.2.2.1.1.14
18 bladeInfoBoa .1.3.6.1.4.
rdManufactur 1.116.5.39
e .2.2.1.1.15
19 bladeInfoCa .1.3.6.1.4.
pacityCpu 1.116.5.39
.2.2.1.1.16
20 bladeInfoCa .1.3.6.1.4.
pacityIo 1.116.5.39
.2.2.1.1.17
21 bladeInfoVolt .1.3.6.1.4.
age 1.116.5.39
.2.2.1.1.18
22 bladeInfoCur .1.3.6.1.4.
rencyType 1.116.5.39
.2.2.1.1.19
(*1) "Not install" is shown if no server blade is installed; "Cannot get data" is shown if the
data cannot be obtained.
(*2) "Not install" is shown if no server blade is installed; "Cannot get data" is shown if the
server blade data cannot be obtained. "Not support" is shown as the response in this
equipment.
(*3) The response is "-1" if no server blade is installed, or if no partition exists.
(*4) The response is "0" if no server blade or no processor is installed.
OID Syntax Access
Display RO
String
Integer32 RO
INTEGER RO
Display RO
String
Display RO
String
Display RO
String
Integer32 RO
Integer32 RO
Integer32 RO
INTEGER RO
1593
Description
Shows the Chassis Serial
Number of the server blade
installed in the slot shown in #5.
(*2)
Shows the Partition Number
corresponding to the location of
this blade slot. (*3)
Shows that the blade supports
LPAR manager or is a basic
model. One of the following
values is shown.
1: basic
2: hvm (support model for LPAR
manager)
3: unknown
Shows the Product Serial Number
of the server blade installed in the
slot shown in #5. (*1)
Shows UUID (Universal Unique
ID) of the server blade installed in
the slot shown in #5. (*1)
Shows the Board Manufacture of
the server blade installed in the
slot shown in #5. (*1)
Shows the max number of
processors mounted on the
server blade installed in the slot
shown in #5. (*4)
Shows the max number of
mezzanine cards mounted on the
server blade installed in the slot
shown in #5. (*4)
Shows the standard voltage value
of the server blade. This value is
shown using the unit of 0.1V.
Shows the current type of the
server chassis. One of the
following values is shown.
1: AC
2: DC
3: unknown