Hitachi Compute Blade 2000 User Manual page 1623

(b) interfaces group (2/2)
Object
No.
identifier
19 ifOutUcastPk .1.3.6.1.2.1.2
ts .2.1.17
20 ifOutDiscard .1.3.6.1.2.1.2
s .2.1.19
21 ifOutErrors .1.3.6.1.2.1.2
.2.1.20
22 ifOutQLen .1.3.6.1.2.1.2
.2.1.21
23 ifSpecific .1.3.6.1.2.1.2
.2.1.22
(*1) This object includes the information only on some interfaces.
(*2) This object is RW in the SNMP standard, but RO for this equipment.
(c) at group
Object
No.
identifier
.1.3.6.1.2.1.3
1 atTable
.1
.1.3.6.1.2.1.3
2 atEntry
.1.1
.1.3.6.1.2.1.3
3 atIfIndex
.1.1.1
atPhysAddre .1.3.6.1.2.1.3
4
ss .1.1.2
atNetAddres .1.3.6.1.2.1.3
5
s .1.1.3
(*1) This object includes the information only on some interfaces.
OID Access
RO Shows the number of unicast packets sent by
each interface. (*1)
RO Shows the number of packets discarded not
because of an error among outgoing packets
from each interface. (*1)
RO Shows the number of error packets among
outgoing packets from each interface. (*1)
RO Shows the number of packets that each
interface can store in the output queue. (*1)
RO Shows the reference to MIB that specifies
features of the interface media. It is the MIB
object ID dependent on ifType. (*1)
OID Access
NA Shows the Address Translation Table.
Shows the entry of the Address Translation
NA
table.
Shows the ifIndex value of the corresponding
RO
interface. (*1)
RO Shows the physical address. (*1)
Shows the IP address corresponding to
RO
atPhysAddress. (*1)
1572
Description
Description