Hitachi Compute Blade 2000 User Manual page 1293

(1) Adjust LPAR Time
You can synchronize LPAR time with LPAR system time or UTC time using Adjust
LPAR Time. Adjust LPAR Time is available only for deactivated LPARs.
LPAR manager firmware version 59-40/79-40 or earlier
On the Date and Time screen, place the cursor on Adjust LPAR Time and

press Enter to show a subscreen.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync SVP
|+----------------------------------------------------------------------------+|
Select a target LPAR on the subscreen and press Enter.

|| 6
|| 7
|| 8
|| 9
|| 10
|+----------------------------| 2 LPAR2
|
|+- System Date and Time -----| 4 LPAR4
|| Date and Time yyyy/mm/dd+------------------+ + 9:00
Adjust LPAR Time ||
+------------------+
| Time Adjust LPAR |
| |
| 0 All LPAR |
| 1 LPAR1 |
|----------------------------+|
| 3 LPAR3 |e Up / [PageDown]:Page Down |
|----------------------------+|
Adjust LPAR Time ||
1242
||
||
||
||
||
||
||