Hitachi Compute Blade 2000 User Manual page 1023

Menu
Q. Quit
If you type F in the SEC command menu, and then press Enter, you can set the
permissible network settings for connecting a FTP server. You can choose to allow or
deny all access, or allow access only from an address range defined by a particular
network address and subnet mask. When you enter a setting, the new setting and a
confirmation message appear. To save the permissible setting for the network, type Y
and press Enter. To cancel the setting, type N and press Enter, or just press Enter.
(F,S,E,H,A,[Q]) : F (Enter)
Allow all? (Y,[N]) : N
Deny all? (Y,[N]) : N
Network address : 192.
([Unchange]) : (Enter)
Subnetmask : 255.
([Unchange]) : (Enter)
-- FTP setting --
Allow : Allow
Network address : 192.
Subnetmask : 255.
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
If you type S in the SEC command menu, and then press Enter, you can set the
permissible network settings for connecting an SSH server. You can choose to allow or
deny all access, or allow access only from an address range defined by a particular
network address and subnet mask. When you enter a setting, the new setting and a
confirmation message appear. To save the permissible setting for the network, type Y
and press Enter. To cancel the setting, type N and press Enter, or just press Enter.
(F,S,E,H,A,[Q]) : S (Enter)
Allow all? (Y,[N]) : N
Deny all? (Y,[N]) : N
Network address : 0.
([Unchange]) : (Enter)
-- SSH setting --
Allow : Allow
Network address : ALL
Subnetmask : -----
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
Quits the SEC command.
(Enter)
(Enter)
0. 0. 0
0. 0. 0
0. 0. 0
0. 0. 0
(Enter)
(Enter)
0. 0. 0
972
Description