Hitachi Compute Blade 2000 User Manual page 1289

# Title Official Name
(6) Date and RTC Time
Time
SEL Time
(7) Time Zone SEL time zone
(8) Current RTC Differential RTC
Init RTC
Initial RTC
(9) Date and LPAR manager
Time display time
Function
Displays the time selected in the display time
selection.
The format is "YYYY/MM/DD hh:mm:ss."
YYYY: Calendar year
MM: Month
DD: Day
hh: Hour (24-hour representation)
mm: Minute
ss: Second
The minimum value is 2000/01/01 00:00:00 and
the maximum value is 2099/12/31 23:59:59.
The SEL time can be set when LPAR SEL Time
has been displayed in the display time selection.
When the SEL time mode is local mode, the time
that has added the SEL time zone is displayed.
When the SEL time mode is GMT, the SEL time
zone is not added.
The time stamp of the logical SEL to be reported
to the LPAR becomes this SEL time.
Displays or sets which time zone the SEL date
and time belongs to.
When the SEL date and time mode is Local-Time,
the changes to this will automatically adjust the
SEL date and time.
You can specify it on 1-hour basis, and the
minimum value is -12 hours and the maximum
value is +14 hours.
You cannot set when the SEL date and time
mode is GMT.
The SEL time zone is set only when LPAR SEL
Time is displayed in the display time selection.
Displays, in decimal, the difference value
between the LPAR RTC time saved in the
configuration information and the system time.
This value is determined immediately after the
LPAR manager system startup and is not
changed during LPAR manager system
operation.
The initial RTC value is displayed when RTC Last
Modified has been displayed in the display time
selection.
With no LPAR manager system time
synchronization with NTP server:
Shows the same time as the LPAR manager
system time unless F6: Change System Date and
Time is performed,
With time synchronization with NTP server:
Shows the LPAR manager system time.
The system equipment time is applied as the
default at LPAR manager boot.
1238
Initial Value
(When LPAR is
added)
-
LPAR manager
System time
zone
0
-