Hitachi Compute Blade 2000 User Manual page 1758

(h) SNMP group (2/2)
Object
No
identifier
22 snmpOutRe .1.3.6.1.2.1.1
adOnlys 1.23
23 snmpOutGe .1.3.6.1.2.1.1
nErrs 1.24
24 snmpOutGe .1.3.6.1.2.1.1
tRequests 1.25
25 snmpOutGe .1.3.6.1.2.1.1
tNexts 1.26
26 snmpOutSe .1.3.6.1.2.1.1
tRequests 1.27
27 snmpOutGe .1.3.6.1.2.1.1
tResponces 1.28
28 snmpOutTr .1.3.6.1.2.1.1
aps 1.29
29 snmpEnabl .1.3.6.1.2.1.1
eAuthenTra 1.30
ps
30 snmpSilent .1.3.6.1.2.1.1
Drops 1.31
31 snmpProxy .1.3.6.1.2.1.1
Drops 1.32
(*1) This object includes the information only on some interfaces.
OID Access
RO Shows the total number of outgoing PDUs
whose error status is readOnly.
RO Shows the total number of outgoing PDUs
whose error status is genErr.
RO Shows the number of outgoing "GetRequests"
messages.
RO Shows the number of outgoing "GetNexts"
messages.
RO Shows the number of outgoing "SetRequests"
messages.
RO Shows the number of outgoing "GetResponces"
messages.
RO Shows the number of outgoing Traps.
RO (*1) Shows whether or not to issue an
authentication-failure Trap.
· enable（1）
· disable（2）
RO Shows the total number of SNMP incoming
messages that were silently dropped because
the reply size was greater than the maximum
message size.
RO Shows the total number of SNMP incoming
messages including GetRequest-PDU,
GetNextRequest-PDU, GetBulkRequest-PDU,
SetRequest-PDU, and InformRequest-PDU,
which were silently dropped because the
transmission of the message to a proxy target
failed in a way that no response PDU could be
returned.
1707
Description