Hitachi Compute Blade 2000 User Manual page 1104

A message "Normal End" is displayed in about 40 seconds.
+------------------------------------------------------------------------------+
|+- System Configuration -----------+-----------------------------------------+|
||
|| LP ID LP_192168020
||
|| LP IP Address 192.168.0.20
|| Subnet Mask 255.255.255.0
|| Default Gateway 0.0.0.0
||
|| BSM1 IP Address 192.168.0.168
|| BSM2 IP Address 0.0.0.0
|| BSM3 IP Address 0.0.0.0
|| BSM4 IP Address 0.0.0.0
|| BSM1 Alert Port 20079
|| BSM2 Alert Port 20079
|| BSM3 Alert Port 20079
|| BSM4 Alert Port 20079
||
|| Management Path Default
|| VNIC System No: 1
|+----------------------------------+-----------------------------------------+|
|
+------------------------------------------------------------------------------+
| F10:Update System Config
+------------------------------------------------------------------------------+
• • •
The operation with the F10 key (Update system Config)
Tip
provides a temporary change in the screen when LPAR
manager is running. Thus, the setting, which is not saved, will
disappear when LPAR manager is rebooted. Execute the F9
key (Save configuration) in the LPAR manager Menu screen
to save the new setting. See
LPAR manager screen
|
| Alert Language
| Virtual Console Port 20801
|
|
|
|
|
|
+------------+
| Normal End |
+------------+
|
|
|
|
|
|
Save configuration changed on
for details.
1053
||
Japanese ||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
|
Esc:Menu |