Hitachi Compute Blade 2000 User Manual page 1833

VMware ESX 4.0/VMware ESXi 4.0
Setting Procedure
1 Log in VMware ESX or vCenter Server as a user with root or Administrator.
2 In the inventory panel, select the host, and click the Configuration tab.
3 Under Software, click Advanced Settings.
4 In the left pane of the Advanced Settings box, click VMkernel.
5 In the right pane, find VMkernel.Boot.nmiAction and ensure that it is set to 2.
6 Click OK.
7 Reboot the host.
Checking the result
Follow the procedure below to check if the setting is properly configured.
1 Log in VMware ESX or vCenter Server as a user with root or Administrator.
2 Click the Configuration tab and then Advanced in the Software group.
3 Click VMkernel > Boot from the category. In the Setting Values shown on the
right, confirm that the value of VMkernel.nmiAction is 2, changed from 3, and
click OK.
1782