Hitachi Compute Blade 2000 User Manual page 1522

Message content LPAR manager restarted a LPAR on the source blade.
Level Information
Explanation Concurrent maintenance is executed and the LPAR is restarted on
the source blade.
What to do None.
Message content
Level Information
Explanation The configuration has been saved.
What to do None.
Message content LPAR manager Shutdown State Changed to InProgress.
Level Information
Explanation The shutdown status has changed to InProgress.
What to do None.
Message content LPAR manager Shutdown State Changed to Ready.
Level Information
Explanation The shutdown status has changed to Ready.
What to do None.
Message content LPAR manager skipped LPAR auto activation process.
Level Information
Explanation "Activate" LPAR was skipped with the auto activate operation.
What to do None.
Message content LPAR manager started retrying the setting of TxRate
Level Warning
Explanation Failed to the setting of TxRate configuration. Retry the setting of
TxRate configuration.
What to do Wait until retrying the setting of TxRate configuration is complete.
Message content
Level Warning
Explanation Failed to shutdown the LPAR manager system.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content
Level Information
Explanation LP system shutdown has started.
What to do None.
LPAR manager saved configuration.
configuration.
LP System Shutdown Failed.
LP System Shutdown Started.
1471