Hitachi Compute Blade 2000 User Manual page 1509

Message content LPAR manager flash memory access error occurred.
Level Error
Explanation A fault occurred in accessing the flash memory.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content
Level Error
Explanation An LPAR manager fault occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content LPAR manager damage occurred. (due to H/W error)
Level Error
Explanation An LPAR manager fault resulting from a hardware fault occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content LPAR manager detected a failure of retrying the setting of
Level Error
Explanation Retrying TxRate setting failed.
What to do Check the network state connected the device, because the network
failure may occur. If the network has no problem, the device may be
out of order. Contact the reseller from which you purchased this
equipment or consult maintenance personnel.
Message content LPAR manager detected a lack of I/O interrupt vectors.
Level Warning
Explanation LPAR manager detected a lack of interrupt vectors.
What to do Check the PCI device configuration. If a PCI device is not supported
by the product, remove it from configuration.
If standard server blade X55R3 or X55S3 model has a single 2-core
CPU onboard, enable SMT (Simultaneous Multi-Threading) for
operation.
If this cannot solve the problem, contact the reseller or consult
maintenance personnel.
LPAR manager damage occurred.
TxRate configuration.
1458