Hitachi Compute Blade 2000 User Manual page 1404

 Output in summary format
If the filename option is omitted, the HvmGetPerf command outputs a system operation
overview in summary format. The following figure shows an example output in summary
format.
This section uses the output example of the IPF version LPAR manager.
GetPerf ver.1 2007/10/01 11:13:27 GMT+9:00
LP IP: 192.168.0.26 Name: 1_Blade3
LPAR Total Busy 54 msec
SYS1 5 msec
SYS2 48 msec
Proc Shr:2 Ded:2
Proc#:000 2.90% Blade#:3 Die#:0 Core#:0 Thread#:0
Proc#:001 2.50% Blade#:3 Die#:0 Core#:1 Thread#:0
Proc#:002 2.90% Blade#:3 Die#:1 Core#:0 Thread#:0
Proc#:003 2.40% Blade#:3 Die#:1 Core#:1 Thread#:0
LPAR Count:3
LPAR#:01 Shr:00 Ded:01 ID:DB_SRVM
SrvRatio: --- Srv: ---%, 1000ms Dsp: 12ms Busy:
LProc#00:000 Hyper: 994msec Ready:
LPAR#:02 Shr:02 Ded:00 IDDB_SRVS
SrvRatio: 100 Srv:100.0%, 2000ms Dsp: 30ms Busy:
LProc#00:Shr Hyper: 985msec Ready:
LProc#01:Shr Hyper: 2000msec Ready:
LPAR#:03 Shr:00 Ded:01 ID:APP_SRVM
SrvRatio: --- Srv: ---%, 1000ms Dsp: 12ms Busy:
LProc#00:001 Hyper: 990msec Ready:
The table below describes the information items output in summary format.
Output item
Header Outputs the command version and the time the operation
overview was output.
LPAR manager Outputs the IP address and identifier of the target LPAR
system manager.
information
LPAR manager Indicates the operating status of the LPAR manager system.
system operation It shows execution times and busy ratios for all LPARs and
information LPAR manager system as well as the numbers of shared and
dedicated CPUs assigned.
Physical Indicates the operating status of the physical processors
processor mounted in the LPAR manager system. It shows the busy
operation ratio and the mounting location of each processor.
information
1.3%
0.1%
1.2%
1.2% Dsp: ---% PC:*
1msec Used: 12msec
1.5% Dsp: 1.5% PC:N
0msec Used: 30msec
0msec Used: 0msec
1.2% Dsp: ---% PC:*
0msec Used: 12msec
Description
1353
Header
LP system information
LP operation information
Physical processor operation
information
LPAR operation information
Operation per physical processor
LPAR operation information
Operation per physical processor
Type option
Always
all
host
all
host
all
pcpu