Hitachi Compute Blade 2000 User Manual page 1611

(4) Executing the e-mailing test
Execute the e-mailing test using e-mail notification by manual operation (the
current status).

Select e-mail notification > Operation > E-mail notification by manual
operation (management LAN) to execute the test.
 Select the destination address from the list. You can select a specific
address or all addresses.
 An inquiry to confirm the e-mail notification, execute it if no problem.
 Logs are collected and then the e-mail notification is executed. Confirm
that the e-mail has reached to the destination address.
Collecting logs takes a few minutes.

E-mail notification is to finish when the e-mail has

been properly transmitted to the mail server.
When the e-mail is sent to multiple destinations in the

test, the email may fail to reach all destinations even if
it fails to reach one destination fails.
If the mailing test fails, review the environment and

settings referring to the following description and
correct them as necessary.
Check if communication between the

management module and the mail server is
available.
- If not, check that the LAN cable is properly
connected.
- Check the network setting of the management
module.
- You need to specify DNS in the network setting
of the management module when specifying the
mail server as the host name.
Check if the SMTP service is running on the

SMTP server.
Check if the basic information and destination

information are properly configured.
The following table describes messages showing results from e-mail notification
triggered by manual operation.
Message
Description
The operation for e-mail address % was successful.
Description: The e-mail notification was successfully sent.
Checking and Action: None.
The operation for e-mail address % failed. The IP address could not be resolved from
the host name.
Description: Failed to obtain an IP address name from the SMTP host name.
Checking and Action: Check the e-mail notification setting (SMTP). Check the network
setting (DNS: domain name system). Check the connection to LAN.
The operation for e-mail address % failed. The format of the IP address is invalid.
1560