Hitachi Compute Blade 2000 User Manual page 1183

4 If DPM and Windows are displayed at the top and the second respectively, Change
Boot Order is not needed. Select Discard Changes and Exit, and then go to Step
8.
If not, select Change the order.
/------------------------------------------------------------------------------\
| Boot Maintenance Manager
\------------------------------------------------------------------------------/
Change the order <EFI Internal Shell>
<Windows *>
<DPM>
Commit Changes and Exit
Discard Changes and Exit
/------------------------------------------------------------------------------\
|
| ^v=Move Highlight <Enter>=Select Entry
\------------------------------------------------------------------------------/
5 When the subscreen is displayed, move DPM and Windows to the top and the
second respectively using a key, [+] or [-].
/------------------------------------------------------------------------------\
| Boot Maintenance Manager
\------------------------------------------------------------------------------/
Change the order <EFI Internal Shell>
<Windows *>
<DPM>
/-----------------------\
Commit Changes and Exit | DPM
Discard Changes and Exit | Windows *
| EFI Internal Shell
\-----------------------/
/------------------------------------------------------------------------------\
| + =Move Selection Up
| <Enter>=Complete Entry
\------------------------------------------------------------------------------/
Change the order
Esc=Exit without Save
Change the order
|
|
|
- =Move Selection Down
Esc=Exit without Save
1132
|
|
|
|
|
|