Hitachi Compute Blade 2000 User Manual page 1811

Operation
event
ID
type
changed HCSM server
settings
3903 Configurati HCSM command
on Access changed HCSM server
settings
3904 HCSM command deleted
HCSM server settings
3905 HCSM command
disconnected HCSM
server session
3913 Changing Syslog transfer
settings
3917 Backing up the fibre
channel settings
(For mezzanine card and
I/O board)
3918 Backing up the fibre
channel settings
(For I/O board on an I/O
slot expansion unit)
385E MAC command initialized
additional MAC address
settings
385F MAC command changed
additional MAC address
settings
Note (*1) This item shows system console command names, and logs are collected by the
same function of the system Web console.
Event logged (*1)
Channel:%1$s IP address:%2$s
Category:%3$s Before:%4$s
After:%5$s
HCSM manager setting is changed.
Channel:%1$s IP address:%2$s
Detail:%3$s Value:%4$s
HCSM manager setting is removed.
Channel:%1$s IP address:%2$s
HCSM server is disconnected.
Channel:%1$s IP address:%3$s
Syslog transfer setting is changed.
Channel:%1$s Detail:%2$s
Value:%3$s
On Partition%1$s, setting(%2$s) is
backed up.
Channel:%3$s Category:%4$s
Blade:%5$s Slot:%6$s File:%7$s
On Partition%1$s, setting(%2$s) is
backed up. Channel:%3$s Category:I/O
adapter on IOEU Blade:%4$s
Slot:%5$s Slot on IOEU:%6$s
File:%7$s
Additional MAC is initialized.
Channel:%1$s Partition:%2$s
Blade:%3$s
Additional MAC is changed.
Channel:%1$s Partition:%2$s
Blade:%3$s
1760
Message