Hitachi Compute Blade 2000 User Manual page 1022

When you have saved the host key, the host key of the SSH server is saved in the
user directory in the I/O module. The host key name is displayed after saving. Press
Enter, and the screen returns to the SSH host key menu. You can take out the host
key file via FTP or SFTP.
If you type R in the SSH host key menu and press Enter, you can restore the host key
of the SSH server. The host key list stored in the user directory is displayed. You are
prompted to select a file to be restored. To restore the host key, type Y and press
Enter. To cancel the restoring, type N and press Enter, or just press Enter.
(G,H,B,R,[Q]) : R (Enter)
-- Backup file list --
<File0>
pub-key_000000.backup
<File1>
pub-test.backup
Select backup file (0-1,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- Restoring backup data was completed.
Hit enter key. (Enter)
 SEC command
You can set the network service. Enter SEC at the prompt and press Enter.
5713RF0 NNNNN(0)IOEU> SEC
<< SEC - Service setting. >>
-- Service setting menu --
F. FTP setting.
S. SSH setting.
E. Telnet setting.
H. Connection allowed network setting for all of above protocols.
A. Show all service setting.
Q. Quit.
(F,S,E,H,A,[Q]) :
Select a menu item from the following list to execute it.
Menu
F. FTP setting.
S. SSH setting.
E. Telnet setting.
Connection allowed
H. network setting for all of
above protocols.
A. Show all service setting.
(Enter)
(Enter)
(Enter)
Sets the FTP server.
Sets the SSH server.
Sets the Telnet server.
Sets the range of permission for network connection to all
three protocols (FTP, SSH, and Telnet).
Displays the current values of all settings set by the SEC
command.
971
Description