Hitachi Compute Blade 2000 User Manual page 1751

(3) Supported standard MIB objects
Eight groups in the standard MIB, such as system, interfaces, at, ip, icmp, tcp, udp,
and snmp, are supported. Objects in each group are partially supported. Supported
MIB objects of each group are described in the table (a) to (h) shown below.
(a) system group
Object
No
identifier
1 sysDescr .1.3.6.1.2.1
.1.1
2 sysObjectID .1.3.6.1.2.1
.1.2
3 sysUpTime .1.3.6.1.2.1
.1.3
4 sysContact .1.3.6.1.2.1
.1.4
5 sysName .1.3.6.1.2.1
.1.5
6 sysLocation .1.3.6.1.2.1
.1.6
(*1) This object is RW in the SNMP standard, but RO for this equipment.
OID Access
NA Describes the management equipment.
This equipment has "Hitachi Compute Blade
2000 I/O slot expansion unit Ver XXXXX" as the
fixed value.
Ver XXXXX shows the firmware version of the
I/O slot expansion unit.
RO Shows the vender OID of the management
equipment.
This equipment has the OID value of
private.hitachi.system.hitachiComputeBlade.iod
(.1.3.6.1.4.1.116.3.39.11) as the fixed value.
RO Shows the accumulated time by the 10msec after
the SNMP agent boots up.
RO Shows the contact related to the management
equipment, which is a character string set with a
(*1)
command.
RO Shows the name related to the management
equipment. The name is the chassis ID value.
(*1)
RO Shows the contact related to the management
equipment, which is a character string set with a
(*1)
command.
1700
Description