Philips Sopho 2000 IPS User Manual page 853

A
CMD027 Specify if the dialed digit should be changed
(Toll Call and International Call) or not.
NOTE: When specifying the changed digits
by CMD027, the same number of
digits must be assigned as specify-
ing the Type of Call by CMD034.
CMD033 Assign the Type of Call Development Table
for each outgoing trunk routes.
CMD034
Assign the Type of Call for each dialed digit
(0-9, A, B) on the basis of each Type of Call
Development Table Number assigned by
CMD033.
NOTE 1: This feature restricts Toll Call and
International Call (Type of Call No.
2 and No. 3).
NOTE 2: When specifying Type of Call by
CMD034, the same number of digits
must be assigned as specifying the
dialed digits to be changed by
CMD027.
END
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
(1) XXX Y
XXX: Call Development Table No.
(000-511) assigned by CMD026
Y : First Dialed Digit: 0-9, A (*), B (#)
(2) XXX 3
XXX: Call Development Table No. of next
digit (000-511)
3 : Referring to the next digit assign-
ment
(1) XXX Y
XXX: Call Development Table No.
(000-511)
Y : Dialed Digit
(2) 1 : Not to be charged
9 : Send to SMDR terminal
(1) 00-63: Trunk Route No.
(2) 0 -127: Type of Call Development Table
(1) XXX Y
XXX: Type of Call Development Table No.
(0-127) assigned by CMD033
Y : First Dialed Digit: 0-9, A (*), B (#)
(2) X-XXX 0
X-XXX: Type of Call Development Table
0
(1) XXX X
XXX: Type of Call Development Table No.
(0-127)
X : Dialed Digit
(2) X 1: For assigning Type of Call
X: 1 : Local Call
2 : Toll Call
3 : International Call
7-9 : Tie Line Call
– 835 –
ROOM CUTOFF
DATA
No.
No. of next digit (0-127)
: Referring to next digit assignment
NWA-008845-001 Rev.5.0
32ch2001.fm
JUNE/01/2007