Philips Sopho 2000 IPS User Manual page 637

(3) SMDR with AP00
The System outline of the SMDR with AP00 is shown below.
The SMDR consists of the AP00 and the external SMDR terminal.
• AP (AP00):
The AP stores various kinds of information which arrives from the MP on an event basis. When a
call is completed, the AP sends out the call information pertaining to that specific call to the SMDR
terminal.
Four of the AP (RS-232C) ports can be used for the SMDR terminal interface. The AP ports
perform as DTE.
The system can accommodate a maximum of one AP00 card.
• SMDR Terminal:
Asynchronous PC is used as the SMDR terminal for receiving and processing the call information
via RS-232C.
The maximum number of SMDR terminal is two, which includes the number of Property
Management System (PMS) terminal.
NOTE: For AP00 card (PN-AP00-B/PN-AP00-D with MRCA program), PMS terminal is not
available.
LC
STATION
STATION MESSAGE DETAIL RECORDING (SMDR)
System Outline of SMDR with AP00
TDSW
AP (AP00)
EXPMEM
TRUNK
MP
MP
– 619 –
SMDR TERMINAL 0/1
RS-232C
INTERFACE
MP : MAIN PROCESSOR
AP : APPLICATION PROCESSOR
EXPMEM: EXPANSION MEMORY
SYSTEM OUTLINE
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006