Philips Sopho 2000 IPS User Manual page 650

For Incoming Call Record, do the following programming.
B
CM13 Provide the SMDR service for incoming calls
to the required stations.
CM35 Provide the SMDR service for incoming calls
to the required trunk routes.
CM08 Specify whether the SMDR service is effective
only for incoming calls with Account Code or
not.
Specify whether the ANI/Caller ID is sent to
SMDR.
NOTE 1:
NOTE 2:
C
DESCRIPTION
When providing incoming calls with
ANI, assign this data in addition to
the programming for AUTOMATIC
NUMBER IDENTIFICATION
(ANI). Page 120
When this data is assigned to 1,
SMDR service for incoming calls is
not provided even if CM13 Y=05 is
0 (To provide).
STATION MESSAGE DETAIL RECORDING (SMDR)
• Y=05
(1) X-XXXXXXXX: Station No.
(2) 0 : To provide
1 : Not provided
• Y=49
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
(1) 426: SMDR for incoming call
(2) 0 : Effective for all incoming calls
1 : Effective only for incoming calls with
Account Code
(1) 463: ANI/Caller ID to SMDR
(2) 0 : To send
1 : Not sent
– 632 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006