Philips Sopho 2000 IPS User Manual page 739

A
CM17
CM42 Specify the maximum number of queuing in
each UCD group.
CM41 Specify the call waiting time before answer or
abandonment for PEG Count analysis.
CM20 Assign the access code for UCD station Busy
Out Set and Reset.
CM90 Assign the UCD Busy Out key on the D
required.
Assign the Release key on the D
quired.
B
DESCRIPTION
term
, if re-
UNIFORM CALL DISTRIBUTION (UCD)
• Y=6 Tie Line incoming call
(1) X-XXXXXXXX: Pilot Station No. of
(2) 0 : Not provided
1 : To provide
• Y=7 DID/Automated Attendant Call
(1) X-XXXXXXXX: Pilot Station No. of
(2) 0 : Not provided
1 : To provide
• Y=B Designation of number of queuing in
each UCD group
(1) X-XXXXXXXX: Pilot Station No. of
(2) 0 : To provide (See CM42>16)
1 : Not provided (No limit)
(1) 16
(2) 01-99
NONE : No limit
• Y=0
(1) 16
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A044: Busy Out Set
A045: Busy Out Reset
term
, if • Y=00
(1) My Line No. +
(2) F0044: UCD Busy Out
• Y=00
(1) My Line No. +
(2) F1020: Release
– 721 –
DATA
UCD group
UCD group
UCD group
: 1 call-99 calls
(4 second increments)
,
+ Key No.
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1011.fm