Philips Sopho 2000 IPS User Manual page 206

To provide Calling Number and Calling Name Display on D
following programming:
[Series 3800 software required]
START
CM12 Assign Service Restriction Class A for Caller
ID Display on the LCD of D
stations.
CM15 Specify the displaying pattern of Caller ID on
the LCD of D
answering a trunk call.
Allow Calling Name Display for incoming
trunk calls in Service Restriction Class A as-
signed by CM12 Y=02.
Allow blinking LCD for caller ID Display on
term
each D
CM60 Specify the displaying pattern of Caller ID on
the LCD of ATTCON before answering or
after answering a trunk call.
CM08 Specify the information to display on the
middle line of the D
forwarding a trunk call to the D
by Call Forwarding-All Calls/No Answer/
Busy Line/Not Available.
A
DESCRIPTION
term
to the required
term
before answering or after
.
term
/ATTCON LCD when
term
term
/ATTCON LCD simultaneously, do the
• Y=02
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=400
(1) 00-15: Service Restriction Class A as-
(2) 0: To display calling number on upper line
of LCD, calling name on middle line of
LCD
1: To display calling name on upper line of
LCD, calling number on middle line of
LCD
• Y=136
(1) 00-15: Service Restriction Class A as-
(2) 0 : Calling Number Display
1 : Calling Name Display
• Y=215
(1) 00-15: Service Restriction Class A as-
(2) 0 : Restricted
1 : Allow
• Y=34
(1) 0-7: ATTCON No.
(2) 0: To display calling number on upper line
of LCD, calling name on middle line of
LCD
(1) 563
(2) 0 : Forwarding station name
/ATTCON 1 : Caller ID
– 188 –
CALLER ID DISPLAY
DATA
signed by CM12 Y=02
signed by CM12 Y=02
signed by CM12 Y=02
(Calling number/Calling name)
NWA-008845-001 Rev.5.0
NOVEMBER/15/2006
32ch1003.fm